Sunday, December 9, 2012

Gillard Looking after Cosumers

Gillard on power deal: Consumers may save $250 a year

As the Council of Australian Governments (COAG) meeting wrapped up in Canberra on Friday, Gillard also secured signed agreements with Victoria, South Australia, NSW, Tasmania and the ACT on launch sites for the National Disability Insurance Scheme (NDIS).
Western Australia and Queensland signed a broader agreement to "learn" from the launch sites' development and implementation, but made no further commitments.
Gillard said COAG had agreed to a package of electricity market measures which would help families and businesses.
"The agreement that we have reached will make a difference of $250 for Australian families on power pricing," she said, adding that some savings would start to flow through from 2014.
West Australian Liberal Premier Colin Barnett said he did not think the $250 would be delivered, but "hopefully future price increases will be less than they would have been".
NSW Liberal Premier Barry O'Farrell was hopeful the figure could be achieved, but said further steps were needed, including capping wages for power sector workers in NSW and axing expensive green power schemes.
Victorian Liberal Premier Ted Baillieu, who had sought more "teeth" for the Australian Energy Regulator, said the authority's "still a bit gummy" and needed to be separate from the Australian Competition and Consumer Commission.
Under the reforms to be rolled out by the states are rule changes to stop over-investment in networks, a new advocacy body to give consumers a voice on price determinations and an extra $23 million in federal funds over four years to beef up the energy regulator.
Energy retailers would offer a wide range of innovative products, such as smart metering and air-conditioner technology, so consumers had more choice on how they used power.
Big corporate energy users will be rewarded for moderating the power loads they put on the system during peak times.
South Australian Labor Premier Jay Weatherill said the reforms would ease the pain of power bills while ensuring reliable supply.
"We must have an electricity market that works not just for the big end of town, but for consumers," he said.
Energy Retailers Association chief Cameron O'Reilly said the package would ease regulation and "ultimately the consumer will win".
After signing a $6 billion funding deal with NSW on Thursday for the full rollout of the NDIS in the state from 2018, Gillard said she did not expect other states to do the same immediately.
"We can now work through with other states and territories and reach long-term agreements about the NDIS," she said.
The leaders also had a "brief discussion" about schools funding and Gillard said the Gonski reforms would be the centrepiece of the next COAG meeting in early 2013.
But talks on harmonising environmental approval processes for major projects collapsed.
Gillard said the states had such divergent views on the matter that the issue was heading toward the "regulatory equivalent of a dalmatian dog".
But there was agreement on ensuring businesses only need to provide one set of documentation to state and federal environmental agencies and work on streamlining the system would continue into 2013.
Queensland Premier Campbell Newman said progress on the issue was "disappointing", while Barnett said the approvals talks had gone "backwards".

Friday, October 5, 2012

Lowest Cost - Injection Moulding

ALNO Product Services is a premier builder of tooling for both the Thermoset and Thermoplastic markets. Our team specialize in high speed, high quality molds.
The moulds produced at ALNO Product Services go through a smart design process that ensuring the absolute lowest total cost solution in the industry.

By providing on time deliveries of the highest quality moulds, the total cost of a project is guaranteed to be the lowest available in today's highly competitive markets.

Educated buyers appreciate the savings garnered by an on time delivery of a mould that is built to print and makes a good part the first time. Moulds designed and built at ALNO Product Services are manufactured to allow the highest production count without requiring extensive tool maintenance.

Therefore longer production runs result in lower production cost and on time deliveries of your product. The Engineers at ALNO Product services will work with you to reduce delays in your production by analysing your design for potential problems before work is started on your tool.

At ALNO Product services we will assist you in modifying your design to improve process ability and reduce any potential costs of secondary operations.

For more information on Toolmaking or Injection Moulding contact ALNO Product Services Today












Saturday, September 29, 2012

Cost Effective Manufacturing

A key attribute to the team at we at ALNO Product Services is its resourceful thinking, a skill in itself. We pride ourselves on the ability of being able to react to any situation that is presented.

We can only do this because the personnel in our employ are highly trained, highly skilled and are highly motivated towards our particular fields of excellence. Over 75% of our employees have been in house trained where our philosophy is we love taking on challenges that other people will not look at.

This basis for ideas offers higher levels of commitment from the team when we are considering new ideas in terms of prototype development combined with product testing.

The milling section offers 4 Axis vertical milling up to diameters of 900mm in terms of turning we offer machining of diameters up 300mm over 750mm length. Our Grinding facilities range from cylindrical surface and centre-less Grinders. Our EDM machining pocket 450 x400 x200 offering high grade machining and finish for both Hardened soft and ceramic materials.

The design office has recently upgraded to SolidWorks 2013 and the Autodesk compatible - Draft-sight 2013. A full Design & build service is available. With the design & build facility in mind we also support our projects and support by request with an on-site capability.

Tool up with ALNO Product Services for cost effective manufacturing





Monday, September 24, 2012

Toolmaking

The team at Alnop Product Services  are highly skilled toolmakers the operate in a fully equipped toolroom that includes spark erosion, CNC turning and 3 axis milling ensures that we can cope with requirements ranging from simple machining to the manufacture of multistage presstools and multi cavity injection moulds.

Obviously, there are a multitude of operations and processes within these parameters so we are always willing to discuss and advise on any requirements.
 
We keep in stock a good selection of general plastics and standard colours that enable us to respond quickly to our customers needs. Finished components are checked, desprued and bulk bagged, although special requests for assembly and packaging can be accommodated.

95% of our customers’ moulds have been designed and manufactured in our toolroom are maintained and kept ready for use, again enabling a quick response to your requirements.

The production side of the business not only utilises our machining and press facilities, but can include the sawing of customers materials. For example aluminium extrusions and sections can be cut either on our automatic cut-off saws, producing high quantities of precision cut components or our double head mitre saws that are able to cope with longer sections. 

Components can be deburred and packed ready for dispatch or go onto other processes that include CNC milling or routing (for the machining of intricate profiles and cut-outs), custom-made punching and preparation of sections, drilling, tapping, tumbling and final packing.   


 

Thursday, August 30, 2012

Tool Up with ALNO

Tool up with ALNO

www.alnoproductservices.com.au

Saturday, July 28, 2012

Manufacturing Engineers

ALNO Product Services - Manufacturing Engineers specialising in both manual and CNC machining of all metals, alloys and plastics based on the NSW Central Coast.
 
Our team offer a high class service in the production of both short and long runs of precision components with a state of the art machine shop. From CNC services of turning, milling and general machining as well as additive manufacturing, rapid prototyping, fabrication capabilities, mould repair and an array of design services.

The diversity of our CNC lathes and mills along with skilled workers differentiates ALNO Product Services which results in high quality workmanship on all machining jobs.

ALNO Product Services offer:
  • Functional Prototypes
  • Short run end use parts
  • Jigs and Fixtures
  • Tooling - Die and Mould

For a 1st Class machining service contact www.alnoproductservices.com.au today


Manufacturing Engineers | Jigs | Fixtures | Rapid Prototyping